Scale Trains HO Rivet Counter SD40-2 Burlington Northern “Bicentennial” w/ DCC & Sound #1876

$325.00

Please note: Pictures are representations; some road numbers may not be shown.

For a comprehensive list of features, please visit the manufacturer’s website.

In stock

SKU: SXT40755 Category: Tag: Railroad Short Name: BN

Description

Railroad Short Name: BN

Features:

  • Era: 1975 to 1979
  • Series 6325 to 6339; former BN 6325, built 2/1972
  • Road number 1878
    • Unique Bicentennial paint scheme
    • Non-standard lifting lugs on long hood radiator section
    • BN-style latched battery box doors with narrow louvers and lift-off hinges
  • Fully-assembled
  • LED-illuminated ground lights on both sides of locomotive*
  • LED-Illuminated rectangular walkway lights mounted between front and rear sanding valve doors and round walkway light, aft of raised walkway duct*
  • LED-illuminated front tricolor stand-off class lights***
  • LED-illuminated Prime PM-8901 Stratolite beacon*
  • Printed number boards with separately controlled backlit LED-illumination*
  • Front EMD-style high pilot plow without multiple unit (MU) hose doors and grab irons and rear multiple unit (MU) hose catch tray
  • 4-hose multiple unit (MU) hose clusters with silver gladhands
  • Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers
  • Front and rear straight uncoupling levers without loop handles
  • As-delivered pilot faces without corner notches
  • Deck mounted multiple unit (MU) receptacles
  • “Tall” stepwells with see-through steps
  • Front and rear early small deck extension
  • Handrail set with outward facing end rail mounting brackets and chain
  • Front and rear standard drop steps
  • Scale sectioned treadplate detail on walkways
  • 81” low short hood with ratchet handbrake and angled chain guard
  • Early cab sub-base doors with early hinges
  • Standard EMD headlight in number board housing
  • Dash-2 cab with 11-bolt (top and bottom) side window panels
  • Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand
  • Sliding cab side windows
  • Tall clear wind wings with mirror at bottom mounted fore of cab side window on both sides of cab
  • Standard EMD sunshades with long sunshade tracks
  • Lost-wax brass cast Leslie RS-3K-R horn mounted on the cab
  • Motorola ASP-16 “firecracker” antenna mounted on the cab
  • Accurate hood door and long hood detail
  • Early electrical cabinet “zig-zag” seam, further from rear of cab
  • Early “stand-off” ECAFB
  • Intermediate inertial air intake grills with top drip rail
  • Standard turbo exhaust stack
  • Accurately-profiled standard-range dynamic brakes with batten strip
  • See-through dynamic brake intakes with resistor grid detail
  • “Chicken-wire” radiator intake grilles
  • See-through standard 48” radiator fan housings with fan blades visible inside
  • Curved radiator fan grab iron
  • Underbody frame rail with separate plumbing and traction motor cables
  • Detailed HT-C trucks with Hyatt bearing caps, early center axle snubbers, sanding lines and brackets, and D-77 traction motor and air duct details
  • Rust-color painted wheelsets
  • Dimensionally accurate truck centers
  • Speed recorder mounted to third axle on left front
  • Rearward facing handbrake chain mount for HTC trucks
  • Tall jacking pads with holes (early)
  • Forward engineer’s side sidesill notch
  • Sill-mount EFCO
  • Frame-mounted steel bell
  • Graham-White (Salem) brand 824-170 and 818-170 primary and secondary centrifugal air filters (accordion-style)
  • 4,000-gallon fuel tank with fuel fillers, vertical gauges, round gauge in tank (right side only), and vertical breather pipe 4,000-gallon fuel tank with fuel fillers, dual vertical gauges, and vertical breather pipe
  • Factory-applied wire grab irons, wire lift rings, windshield wipers, trainline hoses with silver gladhands, sand hatch covers, and much more
  • Motor with 5-pole skew wound armature
  • Dual flywheels
  • All-wheel drive
  • All-wheel electrical pick-up
  • Directional LED headlights
  • Printing and lettering legible even under magnification
  • Operates on Code 70, 83 and 100 rail
  • Packaging safely stores model
  • Minimum radius: 18”
  • Recommended radius: 22”

Sound Features:

  • ESU LokSound 5 DCC & Sound decoder with “Full Throttle” functions
  • Two (2) cube-type speakers
  • Turbocharged EMD 16 Cylinder 645E3 prime mover
  • ESU designed “PowerPack” with two super capacitors***
  • Operates on both DC and DCC layouts

Additional information

Weight 3 lbs
Dimensions 14 × 6 × 3 in

Reviews

There are no reviews yet.

Be the first to review “Scale Trains HO Rivet Counter SD40-2 Burlington Northern “Bicentennial” w/ DCC & Sound #1876”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.