Description
Railroad Short Name: BNSF
Features:
- Era: 2016 to Present
- Series 4200 to 4299, 5533 to 5546; built November 2016
- Fully-assembled
- Multiple road numbers
- Prototype BNSF ES44s do not have ground lights
- LED-illuminated front, rear and rectangle side walkway lights*
- LED-illuminated front deck-mounted ditch lights
- Printed and LED lighted number boards*
- Semi-scale coupler buffers equipped with die-cast metal semi-scale Type E knuckle couplers
- Inside loop uncoupling levers with up down brackets
- Single trainline hose with silver gladhand
- Dual front dummy Multiple Unit (MU) receptacles mounted to pilot face
- Front raised and rear flush pilot-mounted Multiple Unit (MU) receptacles
- See-through round-hole stepwell steps
- Walkway with front anticlimber; no support brackets
- GE “nub” pattern walkway tread
- Late handrails with U-bolt caps and wide rear most stanchion on long side
- Narrow profile end handrails
- Sand box clean out door with knuckle buster latch
- Front nose headlight
- Front straight grab irons mounted directly to the nose
- Right nose door with window
- Front high-mounted (cab) numberboard housings
- Dual cab side blue flag holder
- Left side under cab front access bolted X panel; rear door with square corrugated grille
- Late cab without barrel bolt latches on subbase doors
- Detailed cab interior with separate floor, rear wall, seats, and control stand
- In cab grade crossing camera mounted on right side
- Tinted cab side windows
- Tall mirror mounted in front of sliding cab side windows on both sides
- Switching mirror mounted between rear of sliding cab side windows and fixed rear  window on engineer’s side
- Cab roof LinkUp International PTC antenna farm with three large and three small Sinclair antennas
- Inverter Cabinet with Bolted and hinged access door, top two X panels same size, three lower X panels with 4 – 6 – 4 Bolt Pattern
- See-through dynamic brake exhaust
- Left side dynamic brake cab: late single blower dynamic brake package with dual stand-off exhaust, two small center grilles, and latched center door
- Etched metal see-through dynamic brake intake grilles with blower motors visible inside
- Right side dynamic brake cab: X panel door, small grille, door with grille, and X panel door
- Dynamic brake cab door with high door handle and high mounted door handle bumper
- Short right side air intake grille
- Left side auxiliary cab: 3 tall doors with latches on the #2 door and long auxiliary cab filter box door
- Right side auxiliary cab: 4 doors with latches on #1 and #4 doors
- ET44 style engine cab doors: latched center door in each set of three
- Three engine cab roof lift rings
- Lost wax brass cast Nathan AirChime K5HL horn mounted on engine cab roof
- ES44 style exhaust stack
- Left side exhaust cab doors: latched center door in set of three
- Flush heat exchanger housing with two-piece wide slot grille
- Late raised radiator grille
- 22 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment
- Left side radiator cab grille arrangement: Raised doors. Grilles – tall-short-tall-short-tall, no grille under brake wheel short front angled grille and two-piece rear angled grille
- Right side radiator cab grille arrangement: Raised doors. Grilles – tall, short, tall, short, short, tall, short, tall, short front angled grill, two-piece rear angled grille
- Flat water fill box with sight glass
- High mounted horizontal rear headlight
- Rear wide-spaced dual dummy Multiple Unit (MU) receptacles
- Accurately profiled frame with separately applied plumbing and cabling
- “C4” A-1-A trucks with idler center axle
- Prototype equipped with a weight management system for optimum adhesion control
- Separately applied details include additional truck side frame cylinders, air piping, cam details, and control boxes mounted on sidesills
- Rust-color painted wheelsets
- Curved handbrake chain bracket
- Toilet drain with interior handle
- AEI tag mounted to right sidesill under front battery box door
- Dual Graham-White (Prime) finned 075 air filters
- Graham-White 994-500 air dryer
- 5,300-gallon fuel tank with internal waste retention tank, vertical fuel gauge, and round fuel gauge
- Dual fuel fills per side
- Angled top left side fuel tank top box
- Short crankcase drainpipe
- Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank mounted electronic bell, brake wheel, and more
- Motor with 5-pole skew wound armature
- Dual flywheels
- All-wheel drive
- All-wheel electrical pick-up
- Directional LED headlights
- Printing and lettering legible under magnification
- Operates on Code 70, 83, and 100 rail
- Packaging safely stores model
- Minimum Radius: 18”
- Recommended Radius: 22”
DCC & Sound Ready Features:
- Operate using DC
- DCC ready with 21-pin connector
Reviews
There are no reviews yet.