Scale Trains HO Rivet Counter AC4400CW CSX “YN2, Spirit of Dante” w/ DCC & Sound #391

$305.00

Please note: Pictures are representations; some road numbers may not be shown.

For a comprehensive list of features, please visit the manufacturer’s website.

Out of stock

SKU: SXT39679 Category: Tag: Railroad Short Name: CSX

Description

Railroad Short Name: CSX

Features:

  • Era: 1999 to present
  • Series 391 to 556; built 8/1999-3/2002
  • Road number 391
    • YN2 paint
    • Special ‘Spirit of ‘Dante’ lettering
  • Fully-assembled
  • Multiple road numbers
  • Operating LED-illuminated ground lights on both sides of locomotive*
  • Operating LED-illuminated front deck-mounted alternating ditch lights**
  • Operating LED-illuminated front, rear, and side walkway lights*
  • Printed low-mount cab number boards with separately controlled backlit LED-illumination*
  • Tall snowplow with open doors and two (2) grab irons
  • Semi-scale coupler buffer equipped with durable metal semi-scale Type E lower-shelf knuckle couplers
  • 5-step stepwells with see-through steps
  • Walkway with front anticlimber
  • GE “nub” pattern walkway tread
  • Wide profile end handrails
  • Front nose headlight
  • Nose door with window
  • Two-piece nose top grab irons
  • Battery cabinet access door without latch
  • GE safety cab with three (3) side windows
  • Right side cab under floor access doors: dual large louver panels per door
  • Left side cab under floor access doors: dual latch door with grille forward of the HVAC unit
  • Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s desktop controls
  • In-cab grade crossing camera
  • Tinted cab side windows
  • Medium mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side
  • Medium rectangular antenna dome; small “cone” antenna, small “button” antenna
  • Intermediate: four (4) square bolted panels and three (3) tall horizontal X-panels
  • Continuous reinforcement rib under dynamic brake intake grilles
  • High-capacity dynamic brake exhaust (3-port)
  • Rearward right-side air intake grille
  • Left side auxiliary cab: three (3) short doors with latches on the #2 door; auxiliary cab filter box door
  • Capacitor box on left side walkway
  • Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors
  • Late angled engine cab profile with tri-fold power assembly access doors and raised “dot” treadplate on centerline
  • Lost-wax brass cast Nathan AirChime K5LAR24 horn mounted on engine cab
  • Late non-flanged exhaust stack housing
  • “Bathtub” exhaust silencer
  • 26 individually-applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment
  • Right side late radiator door grilles in alternating heights
  • Standard brake wheel
  • Left rear hood door grille arrangement: tall, short, tall grilles
  • Tall, latched access door on long hood end
  • Low-mounted rear sand fill
  • Late angled lifting “tabs” on ends of radiator wings
  • Accurately profiled frame with separately-applied plumbing and traction motor cabling
  • Early GE Steerable Trucks
    • Rotating axle bearing caps
    • No speed recorder
  • Dual Graham-White (Prime) 975-075 air filters
  • Graham-White 975-100 “twin tower” air filter dryer
  • 5,000-gallon fuel tank with angled weld seam; clean out on left side
  • Single fuel fills per side
  • Round and vertical analog fuel gauges; digital fuel gauges
  • Fuel tank mounted steel bell
  • Separate air tanks with lower mounting brackets, connector pipe, and connector pipe cover
  • Early square handbrake chain bracket
  • Spare coupler knuckle holders on rear pilot face
  • Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more
  • Motor with 5-pole, skew-wound armature
  • Dual flywheels
  • All-wheel drive
  • All-wheel electrical pick-up
  • Directional LED headlights
  • Printing and lettering legible under magnification
  • Operates on Code 70, 83, and 100 rail
  • Packaging safely stores model
  • Minimum Radius: 18”
  • Recommended Radius: 22”

Sound Features:

  • ESU-LokSound 5 DCC and Sound decoder with “Full Throttle” Functions
  • Two (2) cube-type speakers
  • Accurate FDL-16 prime mover and auxiliary sounds, horn, bell, and more
  • ESU-designed PowerPack with two (2) super capacitors***
  • Operates on both DC and DCC layouts

Additional information

Weight 3 lbs
Dimensions 14 × 6 × 3 in

Reviews

There are no reviews yet.

Be the first to review “Scale Trains HO Rivet Counter AC4400CW CSX “YN2, Spirit of Dante” w/ DCC & Sound #391”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.