Description
Railroad Short Name: SLSF
Features:
- Era: 1978 to early 1980s
- Series 950 to 957; built 7/1978
- Road numbers 950, 952, 953, 955, and 957
- Lost-wax brass cast Leslie RS-5T-R horn mounted to cab
- Road numbers 951, 954, and 956
- Lost-wax brass cast Leslie RS-5T-R horn mounted to cab with all chimes facing forward
- Fully-assembled
- LED-illuminated ground lights on both sides of locomotive*
- LED-Illuminated rectangular walkway lights mounted between front and rear sanding valve doors and round walkway light, aft of raised walkway duct*
- Operating front Pyle-National Single clear Gyralite on low short hood*
- LED-illuminated tricolor front and rear flush-mounted class lights with raised gaskets***
- Directional LED-illuminated headlights
- LED-illuminated Prime PM-8901 Stratolite beacon*
- Printed number boards with separately controlled backlit LED-illumination*
- “Footboard” style pilot plow, front and rear
- 3-hose multiple unit (MU) hose clusters with silver gladhands
- Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers, painted a dingy gray/brown color to represent the color of couplers in service
- Front and rear straight uncoupling levers with loop handles; two inner and two outer mounting brackets
- Notched pilot faces with high angled lifting slots
- Pilot face mounted multiple unit (MU) receptacles
- “Tall” stepwells with see-through steps
- Front and rear late small deck extension
- Handrail set with outward facing end rail mounting brackets and chain
- Front and rear late “fixed” drop steps
- Scale sectioned treadplate detail on walkways
- 88” low short hood with wheel handbrake and round vent on lower right side
- Bolted battery box doors with wide louvers
- Late cab sub-base doors with lift-off hinges
- Standard EMD headlight in number board housing
- Dash-2 cab with 13-bolt (top and bottom) side window panels
- Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand
- Sliding cab side windows
- Tall mirrors mounted fore and aft of cab side windows on both sides of cab
- Standard EMD sunshades with long sunshade tracks
- “Whip” antenna mounted on cab roof
- Accurate hood door and long hood detail
- Early electrical cabinet “zig-zag” seam, further from the rear of the cab
- Late welded ECAFB
- Intermediate inertial air intake grills with top drip rail
- Standard turbo exhaust stack
- Accurately-profiled standard-range dynamic brakes with batten strip
- See-through dynamic brake intakes with resistor grid detail
- Corrugated radiator intake grilles
- See-through standard 48” radiator fan housings with fan blades visible inside
- Curved radiator fan grab iron
- Underbody frame rail with separate plumbing and traction motor cables
- Detailed HT-C trucks with Hyatt bearing caps, late center axle snubbers, sanding lines and brackets, and D-77 traction motor and air duct details
- Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service
- Dimensionally accurate truck centers
- Speed recorder mounted to third axle on left front
- Rearward-facing handbrake chain mount for HTC trucks
- Short jacking pads (late)
- Forward engineer’s side sidesill notch
- Sill-mount EFCO
- Frame-mounted steel bell
- Graham-White (Salem) brand 824-170 and 818-170 primary and secondary centrifugal air filters (accordion-style)
- 4,000-gallon fuel tank with fuel fillers, vertical gauges, round gauge in tank (right side only), and vertical breather pipe
- Factory-applied wire grab irons, wire lift rings, windshield wipers, trainline hoses with silver gladhands, sand hatch covers, and much more
- Motor with 5-pole skew wound armature
- Dual flywheels
- All-wheel drive
- All-wheel electrical pick-up
- Printing and lettering legible even under magnification
- Operates on Code 70, 83, and 100 rail
- Packaging safely stores the model
- Minimum radius: 18”
- Recommended radius: 22”
Reviews
There are no reviews yet.